SOOPII 100W 10ft USB C to USB C Cable Fast Charge, Nylon Braided Cable with LED Display for lPhone 15/15 Pro/15 Plus/15 Pro Max,lPad Air,MacBook Pro,Samsung Galaxy S23/S22, Pixel, LG (Red)

Purchased cable for the digital display to assess rate of charge to determine when full charge is achieved on devices such as power banks that only have led indicators of approximate percentage charge. Cannot speak to durability of product as I have only utilized it around six times to date. However, so far, unlike some other reviews reporting early failure, my cable still appears to be working.The digital display is excellent for determining when the charge rate goes to zero (when the power bank is fully charged). When charging my power banks which also have a digital display indicating charge percentage, when my power bank indicates 100% charged, the cable digital display goes to zero W of power being transferred so I am assuming that this will be a good indicator to prevent overcharging of devices that do not have as precise an indication system.I also cannot speak to the accuracy of the display as I did not have a chance to compare it to a known standard. However, for what I am using it for, the actual numerical accuracy is not so important.However, one negative that I noted was that in comparing this cable with another 100W cable that does not have a display, it took about 20% longer to replenish the charge on my power bank in my tests (I timed how long it took to go from 40% charge to 100% charge on my power bank that has a built in digital charge percentage display). This is even though the “control cable” is 10ft long compared to this SOOPII cable that is only 4ft long. I would have thought that the SOOPII cable would be faster as the shorter length should result in less line resistance. I guess this is not as critical in my use case as I will probably not be using this SOOPII digital cable to fast charge my devices anyway as I really got this cable as a convenient way to compare the efficiency of various chargers. Again, probably not good as a dedicated metering device when it comes to accuracy (although it may be), but hopefully the digital “gauge” is consistent enough that it is OK to serve as a convenient comparative measuring device.I suspect that this cable actually does not allow as rapid charging as advertised, since the number does not come close to the theoretical ratings of my chargers. IOW, either the cable is accurate and my chargers are not outputting their rated power, or the numbers on the cable are low, or the cable is preventing the chargers from delivering the full power to the device being charged. It could be a little of each of the above as I noted that the charge times are longer with this cable than with some of my other cables when charging the same device (from and to the same charge percentage) and using the same charger so that the only variable is the cable being used.At any rate, the price of this cable is worth the novelty of the digital display as long as it continues to work. I will update (downgrade?) my rating based on whether or not this cable continues to work. I am limiting the power fed through this cable to no more than 30-40W as I do not want to adversely affect its longevity even though it is supposedly rated to 100W (based on other’s experiences with overheating, display failure and shorting out, I tend to doubt it can truly handle 100W so I am “playing it safe”, LOL). For now, I am reasonably happy with my purchase.Update: Was pleased enough with the cable that I ordered another one. Decided to compare the two to see how consistent the readings were. Both cables were the same length (4ft). Tested using 20000mAh power bank charging a non-PD iPad from 60% charge. Swapped between the two cables I had several times to see if there was any variation in the readings. One cable consistently read 13W and the other consistently read 12W (consistently meaning swapping back and forth several times). Essentially just under a 10% variation between the two. I did not see anything in the specs indicating what the tolerances were supposed to be. At any rate, good enough for my purposes but still shows a lack of consistency between the two cables (which means the accuracy of the actual displayed value one or the other cables, or both are suspect). Hopefully at least the durability with hold up.Ended up testing cable with a small USB multimeter. Cannot ascertain which reading is the correct one but added a photograph that shows that readings are within 0.9w of each other. Also, as can be seen, the display is quite bright and easy to read. The cable itself is quite flexible as can be seen in a comparison with a competitor’s cable which is stiff and cannot be “doubled up” on itself (the Soopii is on the bottom). The down side to this is that the competitor’s cable, while stiffer, is probably more durable and is much less prone to potential kinking. The SooPii cable housing (again, on the bottom with the blue connector) is slightly narrower than the competition, which ensures that it will fit into ports that have little clearance around your phone’s protective case for the connector. Please let me know if you find this review helpful.

I've used this cable for a couple of months now and it delivers on all of its promises and more. It allows you to see if your device is charging at the correct rate and will show if your ac adapter is delivering power at the specified rate.Whether you are charging a phone or a laptop, its comforting to look down and see the display confirming your device is being charged at the correct wattage.

The reported power between the cable's meter and the tester's meters were reasonably close. Enough to not really care given the initial intended use for this cable. The temperature of the cable's meter on the other hand was a bit alarming... let me explain....I bought the cable to help monitor power going into a charging station for drone batteries and the charger for that is a 100W USB-C PD power supply. The batteries have 4 charge LEDs (DJI Mavic 3 batteries) that give a rough approximation to the state of charge, but when it hits the last/top bar, it's really hard to tell just how much time you might have to wait until you hit 100%. You see, the initial ~80% of the battery goes in relatively fast at the full 100W rated capacity and then slows down substantially to top off the battery up to the full 100%. The power meter would help give a better idea of how much charging was still left. So, I purchased these specifically to monitor the progress of batteries I'm charging in the field during repeat charge and fly drone missions.Anyway, I had 3 dead batteries that needed charging and I had purchased two of these cables, so I figured I would run them through their paces to see how they performed. Starting with the first battery and the first cable, within the first few minutes the cable was very warm. During the first battery charge the cable topped out at just over 139F/59.5C as pictured. On the second battery it topped out at just over 140F/60C. For the third battery, I switched out to the second cable I purchased to see if maybe the first cable was just defective. That one topped out at 138F/59C. For reference, this made for a max temperature rise of 67F/37C above the ambient temperature of 73F/23C. And, also of note, the USB tester that is pictured maxed out at 107F/41.7C during all of this testing.At lower power the cables were still "warm" but substantially cooler than when pushed to full load. I understand that any time you push something to its rated limit you are tempting fate. And, before I even received the cables I received an Amazon message from the vendor stating to never push them above their limit (which, along with the other reviews of these being hot is a bit foreshadowing). Unfortunately, as hot as these get, I'll never be able to use these cables in the heat of summer without a serious concern for something catching fire during charging. The last thing I need is a set of lithium batteries to catch fire (a Class-D fire)... while inside my car... while it's parked in the woods. :pIn the end, since I'm not aware of anyone else making a built-in USB power meter rated for more than 100 watts, I'll probably stick to just purchasing another USB tester to monitor the power draw as the tester runs substantially cooler. I just hate how small the numbers are on the testers and the fact that it's yet another tiny bit of gear floating around in the bag. As for what to do with these cables, I'll just relegate them to charging devices that I know don't draw nearly as much power. #disapointed #dashedhopes #toasty #onlyyoucanpreventforrestfires

I use these in place for my 45w charge cables that have broke (mostlikely due to limits or build quality) for $27 for 2 (10ft) and 1 (4ft) cable it isn't a bad price. I paid 60 for a block and charger that was a 45w block and a 45w 6ft cord. With the makers giving it a 2 year lifetime warranty. I plan on buying more from this manufacturer due to holding quality above anything with assurance that the cord will work for 2 years atleast. Over spec for what I use them for. But I will never have to worry about burning the cables up with use and time. I see the charger hitting no higher that 32w at some points while charging my phone(s).

Haven't had these very long, but the built-in cable display is a real help for building small board systems where power usage is handy to know (like an RPi MagicMirror with sensors). The only weirdness is that the C connectors seem to only work one way - that is, you can't flip the cable over. So if your project isn't working with this cable, flip one end over and it will. At least in my case. I've got two of them and they both act like that.

This cable is a must-have for tech-savvy individuals. Its fast charging capabilities and LED display make it a standout choice. The 100W power ensures rapid charging, and the LED display keeps you informed about the charging status. With its durable nylon braided design, it's a reliable, long-lasting option for all your devices. Upgrade your charging game with this cable.

Ich habe mir das SooPii USB-C auf USB-C Kabel vor kurzem gekauft und bin äußerst zufrieden mit meinem Kauf. Dieses Kabel hat sich als äußerst nützlich und praktisch für meine verschiedenen Geräte erwiesen.Die Länge des Kabels (1,2 Meter) ist ideal, um meine Geräte bequem aufzuladen, ohne dabei an die Steckdose gebunden zu sein. Das Nylongeflecht um das Kabel herum fühlt sich robust an und verhindert ein Verheddern oder Verschleiß im täglichen Gebrauch.Das beeindruckendste Feature dieses Kabels ist jedoch das integrierte LED Display. Es zeigt in Echtzeit die aktuelle Spannung und den Ladestrom an, was unglaublich praktisch ist. So kann ich immer sicherstellen, dass meine Geräte optimal und sicher aufgeladen werden. Dies ist besonders wichtig für mich, da ich ein iPad Air und ein MacBook Pro besitze, die eine zuverlässige und schnelle Ladung erfordern.Die 100W PD Schnellladefunktion dieses Kabels ist äußerst effizient und hat meine Ladezeiten erheblich verkürzt. Mein iPad Air und MacBook Pro werden nun in Rekordzeit aufgeladen.Die Kompatibilität dieses Kabels ist beeindruckend. Es funktioniert einwandfrei mit meinem iPad Air, iPad Pro, MacBook Pro und meinem Samsung Galaxy S21. Die universelle Kompatibilität macht es zu einem vielseitigen Begleiter.Das schlichte schwarze Design des Kabels passt perfekt zu meinen Geräten und verleiht ihnen einen eleganten Look. Die robusten Stecker und die hochwertige Verarbeitung des Kabels geben mir das Vertrauen, dass es lange halten wird.Insgesamt bin ich äußerst zufrieden mit dem SooPii USB-C auf USB-C Kabel. Die Kombination aus hoher Leistung, praktischem LED Display und universeller Kompatibilität macht es zu einem Must-have für jeden Technikliebhaber. Ich kann es uneingeschränkt empfehlen.

Cavetti di buona fattura, al tatto sembrano robusti e di buona qualità. Il display è presente su un solo connettore Usb C. Il connettore con il display va collegato al telefono se si vuole vedere il valore in Watt di ri ricarica, se si connette al carica batterie segna sempre 0. Ricordarsi che se lo si usa per ricaricare il telefonino sul comodino di notte, il display resta sempre acceso con una discreta luce che puo risultare fastidiosa. Il vero vantaggio di questi cavetti è che ti permetto di capire come funziona la ricarica inteliggente del tuo dispositivo e a quanto stai effetivamente ricaricando.

Ich benutze das Kabel, um an einem entsprechend starkem USB-Ladegerät mein iPad Pro aufzuladen. Die Ladeleistung ist wirklich stark, das iPad ist innerhalb kürzester Zeit wieder 100% aufgeladen.Ich habe auch einige "normale" USB-Ladekabel hier, aber diese benötigen deutlich länger. Das Display ist eine nette Spielerei - ich mag so etwas, es ist informativ und man sieht auch bei ausgeschaltetem Gerät (oder wenn die Hülle zugeklappt ist) auf einem Blick wie weit der Ladevorgang ist.Der hohen Ladeleistung entsprechend ist das Kabel natürlich etwas steifer als übliche USB-Kabel, aber immer noch gut aufwickelbar.

Seguivo questa tipologia di cavi USB Type C con display da diverso tempo e grazie ad un’offerta durante i recenti Prime Days ho deciso di acquistarlo e devo dire che non potrei essere più soddisfatto.La prima cosa che mi ha colpito è stata la qualità costruttiva del cavo. La guaina in nylon intrecciato sembra estremamente resistente e resistente all'usura, il che mi dà la fiducia che durerà nel tempo. Inoltre, la lunghezza del cavo è perfetta per le mie esigenze, consentendomi di utilizzarlo comodamente ovunque.La vera chicca di questo cavo è il display a LED che indica la potenza erogata in tempo reale. Questa caratteristica è un vero game changer per me. Ora posso tenere traccia con precisione della potenza che viene fornita ai miei dispositivi, il che è fondamentale per garantire che l'alimentatore stia erogando la giusta potenza. Questo è particolarmente importante per i dispositivi che richiedono una ricarica rapida, e il cavo ha dimostrato di essere affidabile in questo senso.Basta collegarlo e il display a LED si illumina immediatamente, mostrando la potenza in watt in tempo reale.

Das Kabel ist gut verarbeitet und das Display lässt sich gut ablesen.Die angezeigten Werte scheinen soweit ich es prüfen Konnte auch zu stimmen und mit wie viel Watt das Gerät gerade lädt und ob es Über Powerdelivery geladen wird.Soweit bin ich sehr zufrieden und habe mir bereits ein zweites der Kabel gekauft