Currie F9 Portal Rear Axle for SCX10-II based vehiclesThe F9 Portal axles create extreme amounts of ground clearance under the center of your axle, increasing the clearance by 1/2"+ (13mm). This provides the equivalent of a tire over 1 inch taller than what is on your vehicle. The advantage of the Vanquish Currie F9 Portals is the gear reduction inside the portal (1.67:1) which can be adjusted with optional gear sets (1.4:1 Overdrive*). By adding reduction at the portal, less torque is transferred through the other upstream components in the drivetrain. These axles are a direct replacement to any Axial AR44 axle, using all stock links. These axles come with all parts needed to assemble a full rear axle. FeaturesPortal box integrated into the rear housing for the most clearance at the axle ends possible and a more scale appearanceGear reduction in the portal of 1.67:1 (18/30), Optional Overdrive Ratio* of 1.4:1 (20/28)Included Vanquish AR44 machined gear setOverall axle reduction of 6.26:1 with stock portal ratio13mm increase in ground clearanceHex to hex width of 7.66 inches, only roughly 5mm wider than a stock AR44 axle with a narrow hexChromoly inner rear axle shafts are triple bearing supportedChromoly stub shafts with 6mm design at the drive pin which tapers down to a 5mm thread for ultimate strengthChromoly spoolAluminum 12mm hex with set screwUses all SCX10-II linkageComplete Fast Eddy Bearings kitLicensed by Currie EnterprisesComes with One Piece Bearing Retainers (Patent Pending)Double shear shock mountsUpper link mounts built into third memberIncreased upper link clearance for more suspension up travel abilityRequires the use of a 350 SLW hub or greater on Vanquish 1.9 wheels, Incision
Trustpilot
1 day ago
3 weeks ago
